PREGUNTAS FRECUENTES SOBRE JEEP® COMPASS

Conoce todos los modelos del Jeep® Compass 2026 a través de la herramienta Comparar modelos .

The price of a 2026 Jeep® Compass depends on the vehicle's trim level. The 2026 Jeep Compass price can be found on the Todos los vehículos página.

Yes, there are two four-wheel-drive systems. The Jeep® Active Drive 4x4 System is standard. The Jeep Active Drive Low 4x4 System powers the available 2026 Jeep Compass Trailhawk®, and features a 20:1 crawl ratio. Este nivel de proeza todoterreno te ayuda a sortear terrenos complicados con confianza de sobra.

Yes, the 2026 Jeep® Compass offers confident control in snowy conditions thanks to its standard Jeep Active Drive 4x4 System. All Compass models are equipped with the Selec-Terrain® Traction Management System, which lets you fine-tune your traction control based on different road conditions—Auto, Snow, Sand, Mud and an available Rock Mode found exclusively on the 2026 Jeep Compass Trailhawk®.

The 2026 Jeep® Compass can tow up to a maximum of 2,000 pounds. The 2.0L Turbo engine gives you the strength to haul larger toys to your destination while offering Best-in-Class standard 200 horsepower and Best-in-Class standard 221 pound-feet of torque.

The curb weight of the 2026 Jeep® Compass is 3,620 pounds.

The length of the 2026 Jeep® Compass is 173.4 inches.

The rear cargo area of the 2026 Jeep® Compass is 59.8 cubic feet when the second-row seats are folded and 27.2 cubic feet when second-row seats are upright.

 

The fuel tank on the 2026 Jeep® Compass holds 13.5 gallons. Regular unleaded fuel is recommended for use in the 2026 JeepCompass.

A full-size spare tire is included on the 2026 Jeep® Compass Trailhawk®. Otros modelos de Jeep Compass están equipados con un kit de servicio de neumáticos.

To reset the oil change indicator after performing the scheduled maintenance, refer to the following procedure: 1. Without pressing the brake pedal, push the ENGINE START/STOP button and cycle the ignition to the ON/RUN position (do not start the engine). 2. Fully press the accelerator pedal, slowly, three times within ten seconds. 3. Cycle the ignition to the OFF position.